Thermostat Thermoregulator Sensor Microcomputer Temperature Humidity Controller for Incubator Cooling Heating Fridge Fish Pet Reptile Aquarium Fish Tank Incubation

Instruction :
- When the thermostat is working normally, press and hold the power button for more than 3 seconds to turn off the thermostat. When the thermostat is off, press and hold the power button for more than 3 seconds to open the thermostat. 
- When the thermostat is working normally, the digital tube displays the current temperature measurement value, and performs automatic recognition conversion of the cooling heating operation mode. 
- When the measured temperature ≥ temperature set value + temperature difference set value, enter the cooling state, the Cool indicator light is on, the cooling relay normally open contact is closed; the Cool indicator flashes, indicating that the cooling device is in the press delay protection state; when measuring the temperature ≤ temperature set value, the Cool indicator is off, and the normally open contact of the refrigeration relay is disconnected. 
- When the measured temperature ≤ temperature set value - temperature difference set value enters the heating state, the Heat indicator light is on, the heating relay normally open contact is closed; when the measured temperature ≥ temperature set value, the Heat indicator is off, the heating relay normally open contact disconnect. 

Specifications :
Product Name:Thermostat. 
Product model:DTC1200. 
Supply voltage:AC110~230V. 
Temperature range:-40°C~+99°C. 
Temperature measurement accuracy:±1 °C (-40 °C ~ +70 °C). 
Sensor line length:100cm. 
Thermostat size:93mm*56mm*34mm. 
Output capacity:cooling (compressor 3A) heating (10A/250VAC). 

Package Included : 
1 x Thermostat.