Wheelbase 3 Inch F4 Toothpick FPV Racing Drone BNF w/ 5.8G 25-200mW VTX Caddx ANT 1200TVL Camera

Features: 
- 40gram 1s brushless Toothpick drone. 
- AIO Flight controller with ELRS Receiver and 5.8G VTX. 
- CADDX ANT 1200TVL Camera. 
- 1202.5 KV11500 brushless motor. 
- Compatible with CaddxFPV Peanut and Insta360 GO2 ( NOT Included). 
- Carrying Caddxfpv peanut Got 4.5 minutes flying time with 1s 650mah battery. 

Specifications: 
Item Name: 115mm F4 1S Toothpick FPV Racing Drone BNF; 
Wheelbase: 115mm; 
Size: 97mmx97mmx35mm (without propellers); 
Weight: 40g(without battery). 

Motor: 
Mode: EX1202.5 KV11500; 
Configu-ration: 9N12P; 
Stator Diamter: 12mm; 
Stator Length: 2.5mm; 
Shaft Diameter: Φ1.5mm; 
Motor Dimension(Dia.*Len): Φ14mm*14.5mm; 
Weight(g): 4.4g; 
No.of Cells(Lipo): 1S. 

Propellers: 
Gemfan 75mm; 
Center Thickness: 5mm; 
Prop Diameter: 75mm; 
Center Hole diameter: 1.5mm; 
Pitch: 0.9in. 

Flight controller: 
MCU:STM32F411CEU6 (100MHZ, 512K FLASH); 
Sensor: MPU6000 / ICM20689 or BMI270 (SPI connection); 
Original whoop size compatible; 
Power supply: 1S battery input (DC 2.9V-4.35V); 
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready; 
Built-in Betaflight OSD(SPI Control); 
Built-in 5.8G VTX; 
Built-in SPI ExpressLRS 2.4GHz receiver; 
Built-in 5V 1A BECFlight controller; 
Firmware target: CRAZYBEEF4SX1280. 

Onboard 4in1 ESC: 
MCU upgraded to EFM8BB21; 
Power supply: 1S LiPo/LiPo HV; 
Current: 5A continuous peak 6A (3 seconds); 
Support BLHeliSuite programmable; 
Factory firmware: O_H_5_REV16_7.HEX; 
Default protocol: DSHOT300. 

Onboard SPI ExpressLRS 2.4GHz Receiver: 
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz; 
RF Frequency: 2.4GHz; 
Antenna : SMD antenna; 
Telemetry output Power: <12dBm; 
Receiver protocol to flight controller: CRSF; 
Could bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest. 

Onboard 5.8g VTX: 
Output power: 25mw~200mw switchable; 
Frequency: 40CH; 
Input voltage: 3.3V 5.5V; 
Current consumption: 300mA(type); 
Frequency: 5.8GHz 5bands 40 channels; 
With Race band; 
Smartaudio ready. 

Caddx ANT 1200tvl camera: 
Image Sensor: 1/3' CMOS Sensor; 
Horizontal Resolution: 1200 TVL; 
TV System: NTSC or PAL; 
IMAGE: 16:9 or 4:3; 
Synchronization: Internal; 
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000; 
S/N Ratio : >52dB (AGC OFF); 
Video Output: CVBS; 
Lens: 1.8mm; 
Min. Illumination: 0.001Lux@F1.2; 
Auto Gain Control: YES; 
BLC: YES; 
WDR: Global WDR; 
DNR: 3D DNR; 
Dimensions: 14*14mm(with bracket to 19*19mm); 
Wide Power Input: DC 3.7-18V; 
Work Temperature: -20℃~+60℃; 
Weight: 2g (N.W.). 

Recommend Lipo Battery: ( NOT Included) 
1S 450mah / 650mah / 660mah / 720mah battery PH2.0 Plug. 

Package Included: 
1x Frame and canopy; 
1x ELRS F4 2G4 flight controller built-in SPI ExpressLRS 2.4G receiver; 
4x EX1202.5 KV11500 brushless motor; 
1x Gemfan 75mm bi-blade Propellers(4cw+4ccw); 
1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera; 
1x 5.8G 25mw~200mw 40ch vtx (Flight controller built-in); 
1x Screw Driver; 
1x Propeller disassemble tool; 
3D Printed canopy for Insta360 GO2 and CaddxFPV Peanut; 
1x Handbag.