Type-C PD Fast Charging Discharge Trigger Decoy DC Digital Display Voltage Current Meter Detection Tester

Detailed explanation of buttons and functions:
The type of PD protocol is displayed every time it is powered on,
'----': PD protocol is not supported,
Pd2.0: Support PD2.0 protocol,
Pd3.0: Support PD3.0 protocol,

How to switch the display content:
In the operation interface, short press K1 key to switch the display voltage/current/rotation display; long press K1 key for 5 seconds to turn off the digital tube and indicator light display, any key to wake up,

How to adjust the voltage range:
1. On the running interface, press the K2 key shortly to enter the voltage adjustment interface, the voltage will flash after the digital gear displays the current gear;
2. At this time, modify by pressing the K2/K1 key (K2 is upshift, K1 is downshift), when the gear is switched, "P7-1" is displayed (P7: a total of 7 voltage gears are supported, -1: Indicates the serial number of the current voltage gear), and then displays the voltage value of the current gear; if the current voltage gear supports PPS gradual voltage regulation, the gradual gear display (20mv 100mv 1v) will be all bright;

5s without any key operation or long press K1 key 2S, automatically return to the running interface:
Note:
"P7-L" one gear "L" gear is the trigger gear in turn. Selecting the L gear to return to the operating interface will trigger all supported gears in turn (5V / 9V / 12V / 15V / 20V / PPS mode ), in this mode, the step-by-step voltage indication on the running interface will be a marquee mode indication; this function is inserted into the batch measurement of the charging head manufacturer,

Note
Generally, the charging head of PD2.0 generally supports 4-5 gears voltage regulation mode, and the format of "P4-1" or "P5-1" will be displayed. The charging head of PD3.0 generally supports 6-7 gears. In voltage regulation mode, the format "P6-1" or "P7-1" will be displayed,

How to adjust the voltage in PPS step-by-step voltage regulation mode:
(1) Make sure that the PPS step-by-step indicator (20mv 100mv 1v) is fully on/one of them;
(2) Press and hold the K2 button to enter the PPS voltage regulation, the digital tube voltage value flashes, activate the 1V step gear voltage regulation;
(3) Press and hold K2 again to switch the gear step by step;
(4) After the corresponding step-by-step gear, press the K1 / K2 key to modify the voltage; when the step-by-step gear indication is fully on, press the K1 / K2 key to exit the PPS voltage regulation mode and select other voltage gears;
(5) 5s without any key operation or long press K1 key 2S, automatically return to the running interface;

This product has a power-off memory function, remember the voltage level and PD mode before power-off next time.