Cetus Kit 1S FPV with 1/4" CMOS Sensor 800TVL Camera Optical Flow Positioning System VR02 Goggles Racing RC Drone Quadcopter

Cetus FPV Kit - Specification: 
Positioning System: Optical flow / Barometer; 
Height Positioning: Barometer; 
Angle Locating: Optical flow ( effective height 0.3-3m); 
Accuracy of auto-hover: 
Horizontal ±0.2m; 
vertical ±0.3m; 
Receiver protocol: Frsky D8; 
Flight controller: Lite 1S Pro brushed FC; 
VTX: 25mW; 
Camera Tilt Degree: 25°; 
Camera: C01 FPV Camera; 
Transmitter: Literaio2 SE Transmitter; 
TX mode: Mode 2 (Left stick throttle); 
Goggles: VR02 Goggles; 
Motor: 716-19000KV Brushed motor; 
Propeller: 31mm 4-blade 0.8mm shaft hole; 
Takeoff weight: 35g(with battery); 
Power system: 1S; 
Battery: BT2.0 300mah 1S Battery (external); 
Flight time: 4-5min; 
Flight distance: 80m (in wide & undisturbed environment). 

C01 FPV Camera - Specification: 
Image Sensor: 1/4' CMOS Sensor; 
Horizontal: 800TVL with Global WDR; 
Signal System: NTSC; 
Lens: 2.1mm(M8) FOV 160°; 
S/N Ratio: >50db; 
Electronic Shutter Speed: Auto; 
Auto Gain Control (AGC): Auto; 
Min. Illumination: 0.01Lux@1.2F; 
D-WDR: Auto; 
Power: DC 3-5.5V; 
Current: 110mA@5V / 120mA@3.3V; 
Housing Material: ABS; 
Dimension: 11*11mm; 
Net weight: 1.4g. 

LiteRadio 2 SE Radio Transmitter - Specification: 
Color: White; 
Frequency Range: 2.4G (2403MHz-2447MHz); 
2.4G System: NRF24L01 or CC2500; 
Channel: 8; 
Support Protocol: 
Bayang; 
Futabas S-FHSS; 
Frsky FCC D16; 
Frsky LBT D16; 
Frsky D8; 
Power: ≤100mw; 
Adapted Drone Type: Multirotor; 
LED Light: 
Green-Power On; 
Red-Warning if the voltage is lower than 3.5V; 
Blue-Normal; 
Battery: Built-in 1000mAh 1S Battery; 
Charging Connector: USB 3.0 Type-C. 

VR02 FPV Goggles - Specification: 
Dimension: 126x143x86.3mm; 
Weight: 300g with 2hr 2000mAh battery; 
Belt: Three-Ways adjustable belt; 
Screen size: 
4.3 inch; 
Screen resolution; 800*480 px; 
Screen brightness: 300cd/m2; 
View Angle: 55°; 
Charging: Type-C Charging; 
Voltage: 3.7V, the device operating current of 500mA@3.7V; 
Current: 500mA; 
BATTERY: 3.7V/2000mAh; 
working time: Around 2 hours. 

7x16mm Brushed Motors - Specification: 
Size: 7x16mm; 
Width: 7mm; 
Height: 16mm; 
Cable lengt: 50mm; 
Shaft Diameter: 0.8mm; 
Weight: 2.95g per motor; 
Speed: 19000KV; 
Voltage: 3.7V; 
Connector: JST 1.25mm 2P connector. 

Features: 
-Auxiliary flight function is suitable for beginner, greatly reducing the threshold of operating. Now everyone can fly!