0.3-6.5/0.3-4mm Wood Carving Drill Chuck Hang Shank with Flexible Shaft for Electric Grinding Drill

Descriptions: 
0.3-6.5/0.3-4mm Wood Carving Drill Chuck Hang Shank with Flexible Shaft for Electric Grinding Drill. 

Specifications: 
Type: 
A - Black rubber flexible shaft; 
B - Silver stainless steel flexible shaft; 
C - 0.3-6.5mm golden hang shank with rubber flexible shaft; 
D - 0.3-4mm silver hang shank with rubber flexible shaft. 
Size: 
A: 
Soft shaft length: 990mm. 
Soft shaft diameter: 9.4mm. 
Shaft length: 790mm. 
Shaft diameter: 6mm. 
Soft shaft material: rubber. 
C: Handle - 148*26mm. 
D: Handle - 139*26mm. 
Weight: 
A - 326g. 
B - 314g. 
C - 497g. 
D - 478g. 

Features: 
- Multi-purpose machine for metal grinding, wood cutting, jade drilling and jade polishing; 
- The product uses an electric grinder with a flexible shaft to easily solve pipes, interfaces and corners that were difficult to reach; 
- The handle is small and easy to grasp, suitable for fine polishing, engraving and sanding operations; 
- Rubber design, light weight, more suitable for long hours of operation; 
- The length of the flexible shaft is approximately 890mm, which extends the working range. 

Note: 
Before using the soft shaft, it is best to install the machine first. After running for 15 minutes at low speed, the parts inside will be run-in. There will be a little heat within 1-2 hours after use. After the running-in period, it can be used normally without odor. 

Instructions: 
- When inserting, the bump on the flexible shaft is aligned with the inner notch of the tail of the hanging mill, and then squeezed after pressing; 
- Small wrench to tighten the clamping head. (clockwise tightening, counterclockwise loosening)
- Replace the hose core: First, unscrew the internal screws with a hexagon socket, then remove the entire shaft to replace. 

Package Included: 
1 Pc x Flexible Shaft / Flexible Shaft with Hang Shank