HD 2-3S 75mm Crazybee F4 Pro V3.0 Flight Controller AIO 10A ESC CineWhoop FPV Racing Drone PNP BNF w/1102 9000KV Motor Runcam Splite3 Lite Camera

Specification: 
Item Name: 75mm Wheelbase 2-3S Brushless Whoop FPV Racing Drone; 
Wheelbase: 75mm; 
Receiver ( Optional): 
Compatible Frsky NON-EU Receiver; 
Compatible Flysky Receiver; 
Compatible DSM2/DSMX Receiver; 
Without Receiver; 
Size: 98mm*98mm*45mm; 
Weight: 48g (without battery), 72g (with battery). 

Crazybee F4 PRO V3.0 Flight Controller - 
MCU: STM32F411CEU6 (100MHZ, 512K FLASH); 
Sensor: ICM20689 or BMI270 (SPI connection); 
Board size: 28.5 * 28.5MM; 
Power supply: 2-4S battery input (DC 7-17V); 
Built-in Betaflight OSD(SPI Control); 
Built-in Current meter Max 70A; 
Current meter scale set to 470; 
Built-in 5V 1A BEC; 
Built-in voltage detection; 
Firmware: 
(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR; 
(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS; 
(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX. 

Onboard 10A BL_S 4In1 ESC - 
MCU upgraded to EFM8BB21; 
Power supply: 2-4S LiPo/LiPo HV (7v/17v); 
Current: 10A continuous peak 12A (5 seconds); 
Support BLHeliSuite programmable; 
Factory firmware: F_H_40_REV16_5.HEX; 
Default protocol: DSHOT600. 

Onboard Frsky NON-EU receiver Version - 
SPI BUS receiver; 
Frsky D8/D16 switchable; 
Compatible Non EU transmitter both D8 and D16 mode; 
Channels: 8ch or 16ch; 
Failsafe support; 
No ground interference ( Transmitter and receiver 1 m from the ground): 300m. 

Onboard Flysky receiver Version - 
SPI BUS receiver; 
Protocol: AFHDS and AFHDS-2A Switchable; 
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A); 
No ground interference ( Transmitter and receiver 1 m from the ground): 300m; 
Failsafe support. 

External DSM2/ X receiver version - 
Serial bus receiver; 
Protocol: DSM2/DSMX compatible; 
Channels:6-9 (Depend on your radio); 
No ground interference ( Transmitter and receiver 1 m from the ground): 300m. 

Without Receiver Version - 
No receiver, need add by yourself; 
Support external serial-bus receiver like xm+, TBS CRSF, S-FHSS etc. 

EX1102 9000KV Motor - 
Mode: EX1102 KV9000; 
Configu-ration: 9N12P; 
Stator Diamter: 11mm; 
Stator Length: 2mm; 
Shaft Diameter: Φ1mm; 
Motor Dimension(Dia.*Len): Φ13.5mm*16mm; 
Weight(g): 2.8g; 
No.of Cells(Lipo): 1S-3S. 

Propeller - 
40mm 4-blade Propeller ( 4 CW + 4 CCW); 
Color: Send Randomly. 

5.8G 40CH 25-200mW VTX - 
Output power: 25~200mw switchable; 
Frequency: 40CH; 
Input voltage: 3.3V 5.5V; 
Current consumption: 300mA(type); 
Antenna: RG178 antenna; 
Frequency: 5.8GHz 5bands 40 channels; 
With Raceband; 
Weight: 3g; 
Smartaudio ready, change VTX bands, powers, channels via OSD. 

Runcam Splite3 Lite Camera - 
Model: Split3-Lite; 
Field of View(FOV): Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3); 
Video Resolution: 1080@60fps/1080@50fps/1080@30fps/720@60fps; 
Video File Format: MOV; 
Image Resolution: 2 MP; 
TV Mode: NTSC (720*480)/PAL (720*576) Switchable; 
Interface: JST 1.25mm / UART and SH 1.0mm; 
Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III); 
Hole Distance of Installation: 25.5*25.5mm; 
PCB Size: 29*29mm; 
Lens Module Size: 14*14mm; 
Lens Specs: M9; 
Power Input: DC 5-20V(Non-direct power supply from battery; 
Powered directly with battery will generate surges and burn the camera.); 
Working Current: 450mA @5V. 

Lipo Battery - 
Capacity: 300mAh; 
Voltage: 11.4v; 
Continuous Discharge Rate: 30C; 
Instantaneous discharge rate: 60C; 
Size: 65mmx18mmx11mm; 
Weight: 23g; 
Connector: XT30. 

Features: 
New Crazybee F4 PRO V3.0 FC AIO 12A 2-3S ESC. 
2S for indoor Cine whoop mode. 
3S for outdoor Freestyle whoop mode. 
The lightest 1102 brushless motor only 2.7g with double ball bearings. 
Powerful and smoothly. 
Betaflight OSD support, easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output). 
Runcam Split3-lite 1080p 60fps DVR ready. 
Camera Angle adjustable. 
VTX power switchable 25mw~200mw. 
Smartaudio ready , change VTX bands, powers, channels via OSD. 
Full telemetry function ready (Frsky Non-EU and Flysky version support). 
Special Breath light ready. 

Package Included: 
1x 75mm FPV Drone; 
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW, color send randomly); 
1x 3S 11.4v 300mAh 30C/60C battery; 
1x Propeller Disassemble Tool; 
1x Screwdriver.