HP Consumer Electronics

Description: Extruder Gear Stepper Motor 42 Motor Ratio Planetary Gearbox Stepper Motor.  Certification:CE, ROSH, ISO, FCC.    Specification: Stepper Motor Length:34mm;  Shaft Size:"D" Shaft 16x8mm;  Motor Lead:Plug;  Including Wire:1M Dupoint Wire.    Planetary Gear Reducer Technical Parameters: Internal Gear Material:45# Steel;  Output Bearing Form:Ball...

Description: Closed loop Integrated Stepper Servo Motor With Driver 0.72Nm 2.0A Servo-Stepper Motor.    Specifications: Product Name:Closed loop Integrated Stepper Servo Motor;  Motor Length:40mm,48mm,60mm;  Current:2.0A;  Certification:ISO;  Step Angle (Degrees):1.8;  Type:Permanent Magnet;  Holding Torque:0.41/0.53/0.72;  Quantity:1 Pc × Motor.    Features: - DSP control technology and...

Description: DC 5V 2 Phase 4 Wire Miniature Stepper Gear Box Motor.    Specification: Voltage:5.0V;  Reduction Ratio:1 : 10;  NO. of Phases:2 Phases;  Excitation Method:Bipolar 2-2 Phase;  Step Angle:1.8° +/- 7% ;  Rotation Direction:CW/CCW;  Detent Torque:50gf.cm (Ref);  Resistance Per Phase:30Ω +/- 7%;  Holding Torque:50gf.cm min;  Pull...

Description: DC 5.0V Stepper Reducer Gear Motor With Motor Driver.    Specification: Step Gear Motor Parameter Table: Test Standard:DC5.0V-1000HZ;  Rated Voltage:DC5.0V;  Step Angle:0.36°(18/50°);  Driving Model:Bopolar 2-2 Phase;  No-Load Speed:60rpm/1000pps(1000HZ);  No-Load Current:≤400mA / 1000pps(1000HZ);  Holding Torque:250gf.cm Min;  Pull Out Torque:220gf.cm Min / 1000pps(1000HZ);  Inductance:9.5mH±15%(25℃ LCR1.0V); ...

Description:  Stepper Motor Driver Controller for 18-48V 42 57 Series 2-phase Digital Stepper Motor Driver.     Specifications:  Input Current: 18~48V DC power supply.  Capacity: not less than 200VA.  Typical value: DC36V.  Output Current: 1.0A~5.6A.  8 gears adjustable:  Resolving power 0.5A.  Drive Mode: Double constant...

Feature:  1. Made of high quality metal and electronic components, it is solid, durable and good performance, long service life.  2. This motor speed controller is designed for accomplishing reversing het motor's direction.  3. Digital display shows the rate in percent of actual speed...

Specification:  Input voltage: DC10-55V (equal to the rated voltage of the motor).  Output voltage:  linear under load.  Output current: 60A.  Continuous current: 40A.  Speed regulation type: flow regulation.  Speed regulation method:  potentiometer (linear).  Support motor: DC brushed motor.  Forward and reverse: support.  Speed adjustment range: 0-100%.  Control frequency: 15KHZ. ...

Description:  42/57 Stepper Motor Mounting Bracket L Motor Bracket for Nema 17/23 Stepper Motor Specification:  Material: Alloy.  Bracket Thickness: 3mm.  1#: Neam17 42 Motor Type: 50x51mm.  2#: Neam23 57 Motor 57 Type: 100x98.5mm.     Features:  Durable with alloy steel material.  Provides 42 or 57 type...

Description:  Stepper Motor Driver Controller for 4.2A 24-60V 57 86 Series 2-phase Digital Stepper Motor Driver.     Specifications:  Product Name: Stepper Motor Deiver Controller.  Power Supply: DC 24-60 (V).  Current Maximum: 4.2A.  Output Phase Current: 1.5A-4.5A.  Logic Input Current: 10-20mA.  Operating Temperature: -15℃~+45℃.  Resolution:...

Description: DC Brush Motor Speed Governor Regulation Switch Governor.     Specification:  Function: PWM Speed Promise CWICCW.  Input voltage: DC9.0-36V.  Input current: ≤10A.  Output voltage: DC9.0-36V.  Output current: ≤10A.  Max Continuous Curtrent: ≤8A.  Ooperating frequency: 2KHZ.  cwlccw switching mode: CW(ON)-OFF-CCW(ON).  Input reverse connection protection: yes.  Volume: 89x50x32.5mm. ...

Description: PWM DC Brush Motor Speed Governor Regulation Switch Governor.    Specification: Function:PWM Speed Promise CWICCW;  Input voltage:DC9.0-36V;  Input current:≤10A;  Output voltage:DC9.0-36V;  Output current:≤10A;  Max Continuous Curtrent:≤8A;  Ooperating frequency:2KHZ;  cwlccw switching mode:CW(ON)-OFF-CCW(ON);  Input reverse connection protection:yes;  Volume:89x50x32.5mm;  Weight:130g.    Wiring instruction: Red:Power input positive pole +; ...

Description: Fixed Support Mounting Bracket for 25GA Encoder Motor.     Specification: Material: aluminium alloy.  Size: as picutre shows.  Application: Suitable for 25GA Encoder Motor.     Features: Easy to install and convenient for using.  Durable for using.     Note: Please note that the packge includes one bracket...

Description:  DC 6V Extra Long thick Thread Out Axis Speed Reduction Gear Motor With M4x100 Metal Gearbox.     Specifications:  VOLTAGE: 6V.  GEAR RATIO: 1:298; 1:100; 1:50.  NO LOAD:  SPEED: 30RPM; 60RPM; 100RPM; 150RPM; 200RPM; 300RPM.  CURRENT: 40MA; 50MA.  LOAD TORQUE:  SPEED: 23RPM; 50RPM; 83RPM; 130RPM;...

Description:  DC6V 90RPM N20 Encoder Motor Reducer Gear Motor DC Gear Motor.     Specification:  Voltage: DC6V.  Speed: 90 RPM.  Basic PPR: 7PPR.  PPR after reduction: 198.6PPR.  Ratio: 100 Reducer Length: 9.0.  No-Load Speed (rpm): 155.  No-Load Current (mA): 60.  Torque (kg.cm): 0.7.  Current (mA): 170. ...

Description:  DC6V 55RPM Gear Motor Miniature Gear Box Motor.     Specification:  Voltage: DC 6.0V.  Speed: 55rpm.  Current: 0.03A.  Power: 1.1W.  Max efficiency: 0.9kg.cm(91.3mN.m)/43rpm/0.72W/0.11A.  Max power: 2.2kg.cm(215.6mN.m)/32rpm/1.1W/0.2A.  Stall torque: 4kg.cm(0.39N.M)/0.42A.  Reduction ratio: 1:380.     Features:  Suitable for 3D printing pen.  Durable and long servive life. ...

Description:  DC12V JGB370 Worm Gear Motor Hollow Shaft Micro DC Gear Motor.     Specifications:  Product Name: DC Worm Gear Motor.  Material: Metal.  Rated Voltage: DC 12V.  No-load Speed: 6/10/18/23/30/40/90/150 RPM.  Shaft Shape: Hollow shaft.  Quantity: 1 Pcs.     Features:  - This type is miniature...

Description:  12V DC Extra Long Thick Thread Out Axis Speed Reduction Gear Motor With M4x100 Metal Gearbox.     Specifications:  VOLTAGE: 12V.  GEAR RATIO: 1:298; 1:100; 1:50.  NO LOAD:  SPEED: 60RPM; 120RPM; 200RPM; 300RPM; 400RPM, 600RPM.  CURRENT: 60MA; 50MA.  LOAD TORQUE:  SPEED: 45RPM; 100RPM; 160RPM;...

Description: DC1.5-6V Mini Electric Reduction Box DC Gear Motor Biaxial Output Motor.     Specification:  Voltage: DC1.5-6V.  Speed: 85-120RPM Shank: Hexagon shank, 3x80mm.  Size: 65x26x26mm.  Reduction ratio: 1:94.  Color: Blue.     Features:  Suitable for DIY robot, car, engine, toys parts and other mechanical parts.  Durable...

Description: DC6V Micro Turbo Worm Gear Motor 35/70RPM Reduction Motor.     Specification:  Voltage: DC 6V.  Type: A; B. Gear ratto: 1:236. No load:  Speed: 35RPM; 70RPM.  Current: ≤50mA; ≤60mA.  Load torque:  Speed: 28RPM; 61RPM.  Current: ≤85mA; ≤105mA.  Torque: 220g.cm; 320g.cm.  Stall:  Current: ≤0.4A.  Torque: 1.5kg.cm; 2.2kg.cm.     Feature:  - Good heat exchange performance, fast heat dissipation.  - Large...

Description:  DC 6V Micro Plastic Gear Motor Permanent Magnet DC Eccentric Shaft Motor.     Specification:  Material: Metal + Plastic.  Diameter: 50mm.  Quantity: 1pc.  Usage: Mainly used for Mechanical watch clock box.  Voltage: DC 6.0V.  No-load speed: 10rpm.  No-load current: 0.06A.  Rated power: 0.45W.  Rated...